After testing this device using firmware version 126.96.36.199 we have determined that it will not work with OnSIP at this time. The Router would not allow SIP packets to pass through to our SIP Proxies in any form.
If there is a SIP ALG running, telnet into the device and enter the following commands:
nvram get nf_sip (It should return a "1") nvram set nf_sip=0 nvram commit
Then reboot the router for the changes to take effect.
NOTE: The information provided above is from another OnSIP customer offering these settings for other customers with a similar device. OnSIP does not sell nor monitor equipment and/or it’s firmware updates/etc. The settings of routers can change and are out of the control of OnSIP. For best results, reach out to the manufacturer directly.
Optimize your network for business VoIP with the right router