Follow

Mobotix SIP Camera

This device must be manually configured.  Do not add MAC Address to Resources.

Device Configuration

The information below is based on using firmware version 2.6.1

Step 1: Gather information for each user

Each user has a set of credentials that will be needed to configure each device. For each device that you are configuring, obtain the following:

  • "SIP Address" (Address of Record)
  • "SIP Password"
  • "Auth Username"
  • "Username"
  • "Domain"
  • "Outbound Proxy"

You can find this information in the "User" tab, click on User's name the device will be configured to expand boxes, "Phone Configuration" box:

Phone configuration section

Step 2: Log into your device through a web browser

Step 3: Enter your user information from Step 1

General Phone Settings:

  • SIP Client > Enable

SIP Accounts:

SIP Address

  • User Name > Username
  • Domain > Domain

Authentication

  • User Name > Auth Username
  • Password > SIP Password

Server

  • Hostname / Address > sip.onsip.com

Available As Proxy > Add Checkmark

Use As Registrar > Add Checkmark

Register Expriation >1  hrs.

Mobotix_SIP_Camera_Config_2018.png

Step 4: Confirm that your device is registered

In the Admin Portal, click on the "Users" tab. You will see a green "online" notation next to each user with a registered device. 

Added August 2019 - information provided by an OnSIP customer 2017

Was this article helpful?
0 out of 0 found this helpful

Comments