Follow

ZyXEL Inbound Call Quality Issue

Telnet into the device (usually 192.168.1.1)
Enter your password
Select 24 - System Maintenance
Select 8 - Command Interpreter Mode

At the ras> prompt, enter the following:
voice config rtp index 1
voice config rtp packetsize 1 g711 3:20ms
voice config rtp save 1

Check that the settings were saved:
voice config rtp index 1

On other ZyXel phones on the page labeled "PHONE" on the navigation bar, change the "Voice Frames per Packet" to "Small" from the default setting of "Large" will accomplish the same.


 

See our top business VoIP phone recommendations 

Download the 2017 Business Phone Guide

Was this article helpful?
0 out of 0 found this helpful

Comments