Follow

Jitsi softphone for Windows

Updated 10/26/2015

Jitsi version 2.8.5426 for Windows.  Tested on Windows 7 64bit with SP1.

Step 1: Gather information.

Each user has a set of credentials which will be needed to configure each phone. For each phone that you are configuring, obtain the following:

  • SIP Password
  • Auth Username
  • Username
  • Domain
  • Outbound Proxy

You can find this information in the user detail pages under the Users tab in the Phone Configuration section.

These images are based on using a Windows 7 64bit computer.

Step 2: Configure your Jitsi settings.

A. When you first open Jitsi after installation it will open setup wizard.  DO NOT enter any data, click on Cancel to continue.

B. Click on Tools then Options

C. Click on Add

D. Choose SIP for Network then click on Advanced, DO NOT enter any user info

E. Enter User Name and SIP Password in Account page

F. In Connection page, enter the following information

  • Registrar: Domain
  • Port: 5060
  • Authorization Name: Auth Username
  • Uncheck Configure Proxy Automatically
  • Proxy: sip.onsip.com
  • Port: 5060
  • Change DTMF method: RTP (RFC2833/RFC4733)

G. On Encoding page, move up the following codec and uncheck all the other codec

  • PCMU/8000
  • PCMA/8000
  • G722/16000
  • iLBC/800
  • GSM/8000

H. Click Next, then click on Sign In. Jitsi should now be registered and ready for use.

 

Was this article helpful?
0 out of 0 found this helpful
Have more questions? Submit a request

Comments

Powered by Zendesk